When replacing marine pumps, valves and piping parts, flange connections are a common source of mismatch. DN size alone is not enough; bolt spacing, pressure rating and sealing face must also be checked.
Confirm the flange standard, bolt count and diameter, bolt circle, outer diameter and thickness. Confirm the PN or Class rating, flange thickness and bolt size. Confirm whether the sealing face is raised-face, flat-face, tongue-and-groove or ring-joint, and match the gasket material to the medium, temperature and pressure.
For a reliable check, provide the nameplate, flange photos and measurements of outer diameter, bolt circle, bolt hole and thickness, or arrange a drawing or on-board measurement.